4 Easy Steps for Installing a VoIP Phone at Home

VoipPinCutting-edge VoIP phones have become increasingly helpful in recent years. Their flexibility and a high level of efficiency are some of the many things making them an essential requirement in modern residential setups.

But the whole story doesn’t end just there. The main question is whether you can successfully set up one at home. While the process might sound somehow technical, the good news is that you could quickly solve the puzzle by following the simple steps explained below.

Determine the Intended Number of Users

Figuring out the number of people who will be using the VoIP service at home is a critical step in the installation process. You may decide to put a handset in every room or just in one room where everyone could access it easily. For multiple handsets in different parts of the house, you can also decide whether to share a single line or have different ones. Determining the number of intended users upfront is essential because it lets you estimate the needed call volume. The information will be very resourceful when you are eventually selecting the most preferred service provider.

Ensure Your Home Has a Stable and Fast Internet Connection

A Voice over Internet Protocol phone requires powerful and fast internet connections for optimal operations. If your house has fluctuating or weak internet signals, you’re highly going to experience recurrent call-drops or poor voice quality. Such issues could be very disappointing unless discovered and fixed early enough. So, before you proceed with your installation process, you should determine your home Internet speed or install one if there’s none. Ensure you contact your service provider to upgrade it if the speed and strength aren’t within the recommended range.

Decide on the Features you want

Preparing a list of desired features of the phone you intend to bring home is one of the most critical steps in the entire process. It’s advisable to take your time and think about all the things you’ll want to do with the device. Having the list of the functions you wish to in mind will help select the best option to cater to your unique demands. It’ll also ensure that you don’t settle on a choice that would under-serve. Once you’ve decided on your preferred features, you can go ahead choosing the right Voice over Internet Protocol service provider. Order the phone and other related hardware, then proceed to the last phase.

Set Up Your Hardware, then Configure the VoIP System

Setting up the hardware is a straightforward process that doesn’t call for any unique expertise. The hardware involved includes the phone, handset, power adaptor, and an Ethernet cable. First, plug the handset cable into the handset port at the back of the phone. The next thing is to connect the phone to a power source. Here, you can use either the power adaptor or the Ethernet cable.

Plug the power cable to the power port and the Ethernet cable into the LAN port, located at the phone’s back. If your house has a LAN network, then you won’t need the power adaptor because the Ethernet cable will power the phone. But if you’re using a Wi-Fi internet connection, you must plug the phone into the Mains supply. The last part is to turn on your phone and then configure it.

Connecting VOIP hardware is always an effortless and fast task. However, a few problems may arise while trying to configure your phone. If you happen to experience any issues in the process, you should feel free to call your service provider for further assistance.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

5 + 3 =